Fiat > Coupe (1993-2000), Brava, Bravo, Marea (all types)

表示件数:
1

(カテゴリ内:4点)

  • (PFF1-801) Front Lower Wishbone Front Bush
    (PFF1-801) Front Lower Wishbone Front Bush
    These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves.

    WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
    16,740円
    注文数:
  • (PFF1-802) Front Lower Wishbone Rear Bush
    (PFF1-802) Front Lower Wishbone Rear Bush
    These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves.

    PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.

    Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.

    It is only possible to fit these bushes after removing the arms from the car.

    For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.

    WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
    16,740円
    注文数:
  • (PFF1-603) Front Anti Roll Bar End Link Mount To Arm Bush
    (PFF1-603) Front Anti Roll Bar End Link Mount To Arm Bush
    7,560円
    注文数:
  • (PFF16-304-23) Front Anti Roll Bar To Chassis Bush 23mm
    (PFF16-304-23) Front Anti Roll Bar To Chassis Bush 23mm
    サイズ:23mm
    10,260円
    注文数:
1

(カテゴリ内:4点)

表示件数: